Ultraformer vs XERF: What’s the Difference and Which One Should You Choose?
If you are considering facial lifting or skin tightening without surgery, you may have heard of Ultraformer and XERF. Both are energy-based treatments designed to improve skin firmness and reduce the appearance of mild to moderate sagging, but they use different technologies.


If you are considering facial lifting or skin tightening without surgery, you may have heard of Ultraformer and XERF. Both are energy-based treatments designed to improve skin firmness and reduce the appearance of mild to moderate sagging, but they use different technologies.
Ultraformer uses focused ultrasound energy, while XERF uses monopolar radiofrequency energy. Both treatments generate controlled heat beneath the skin to stimulate collagen remodeling.
So, which is better: Ultraformer or XERF?
The answer depends on your facial anatomy, degree of skin laxity, treatment goals, and personal preferences. Neither technology is universally superior.
At Clear Skin Dermatology in Asoke, Bangkok, we believe that choosing a skin-tightening treatment should begin with an assessment of your skin and facial structure, rather than simply choosing the most popular device.
This article explains how Ultraformer and XERF differ, what results you can realistically expect, and which factors matter most when selecting a treatment.
What Is Ultraformer?
Ultraformer is a family of nonsurgical skin-tightening devices that use focused ultrasound technology.
Ultraformer III, one of the established systems in this family, uses high-intensity focused ultrasound (HIFU) to deliver thermal energy at selected depths beneath the skin.
This energy produces small, controlled zones of heating that stimulate collagen contraction and remodeling.
Over time, the body’s healing response may improve skin firmness and provide modest lifting effects.
How Does Ultraformer Work?
Ultraformer III uses different treatment cartridges designed to deliver focused energy at specific depths.
Common facial cartridge depths include:
- 1.5 mm for relatively superficial dermal tissue
- 2.0 mm for selected superficial treatment areas
- 3.0 mm for deeper dermal tissue
- 4.5 mm for deeper supporting tissue, depending on anatomy
The appropriate cartridge and treatment settings depend on the patient’s facial structure and the treatment area.
These numbers indicate the intended focal depths of the ultrasound energy. They do not guarantee that the same anatomical layer is treated in every patient.
What Concerns Can Ultraformer Address?
Ultraformer may be considered for:
- Mild facial sagging
- Early jowls
- Reduced jawline definition
- Mild skin laxity beneath the chin
- Neck skin laxity
- Reduced facial firmness
The improvement is generally subtle to moderate rather than dramatic.
Patients with significant excess skin or advanced sagging may require other approaches.
What Is XERF?
XERF is a nonsurgical skin-tightening system that uses monopolar radiofrequency energy.
Instead of delivering focused ultrasound energy to discrete treatment points, XERF generates heat within tissue through radiofrequency energy.
XERF uses two radiofrequency frequencies, 6.78 MHz and 2 MHz, along with adjustable treatment settings and surface cooling.
The goal is to create controlled tissue heating that may stimulate collagen remodeling and improve skin firmness.
How Does XERF Work?
Radiofrequency energy produces heat as electrical current passes through tissue.
The pattern and depth of heating depend on the device design, treatment settings, and electrical properties of the tissue.
XERF includes adjustable energy delivery, impedance monitoring, and cooling technology to support treatment.
These features allow clinicians to adapt the procedure to different treatment areas.
However, the heating depth of radiofrequency cannot be directly equated with the focal depths of ultrasound cartridges.
What Concerns Can XERF Address?
XERF may be considered for:
- Mild to moderate skin laxity
- Reduced skin firmness
- Early loss of jawline definition
- Mild neck skin laxity
- Selected fine lines and age-related changes
Results depend on patient selection, treatment technique, and individual response.
Ultraformer vs XERF: Key Differences at a Glance

| Feature | Ultraformer III | XERF |
|---|---|---|
| Technology | Focused ultrasound | Monopolar radiofrequency |
| Energy delivery | Concentrated heating at selected focal depths | Radiofrequency heating distributed through tissue |
| Treatment depth | Selected by ultrasound cartridge | Influenced by frequency, settings, and tissue characteristics |
| Primary goal | Skin tightening and selected lifting effects | Skin tightening and collagen remodeling |
| Treatment sensation | Deep aching, tingling, or brief sharp discomfort | Warmth or heat, sometimes intense |
| Cooling | Depends on device and treatment protocol | Integrated surface cooling |
| Recovery | Usually minimal downtime | Usually minimal downtime |
| Results | Develop gradually over weeks to months | Develop gradually over weeks to months |
| Best candidates | Selected patients with mild to moderate laxity | Selected patients with mild to moderate laxity |
Both technologies have the potential to improve skin firmness. The most important distinction is how they deliver energy into the tissues.
Which Is Better for Facial Lifting: Ultraformer or XERF?
Facial lifting and skin tightening are related but not identical goals.
A patient concerned about sagging may have loose skin, descent of deeper tissues, loss of facial volume, or a combination of these changes.
Different causes may require different treatments.
Ultraformer for Early Facial Sagging
Ultraformer may be considered when focused treatment at selected tissue depths is appropriate.
It may provide modest improvement in early jawline laxity and selected areas of facial sagging.
However, the amount of lifting depends on tissue characteristics and individual response.
XERF for Skin Firmness
XERF may be considered when the goal is to improve skin firmness and mild laxity through radiofrequency heating.
Some patients may notice gradual improvement in skin tightness and facial contours.
However, it is not accurate to assume that XERF only treats superficial skin or that Ultraformer only treats deeper tissues. Both technologies can influence multiple tissue levels.
Is One Proven to Lift Better?
There is not enough high-quality, direct comparative evidence to establish that Ultraformer III consistently provides better lifting than XERF, or that XERF consistently produces superior skin tightening.
Published studies involving other focused ultrasound and monopolar radiofrequency systems cannot automatically be applied to these exact devices.
The better treatment is the one that is appropriate for your anatomy, concerns, and risk profile.
Which Is Better for the Jawline and Jowls?
Early jowling is a common reason patients seek nonsurgical lifting.
Both Ultraformer and XERF may offer modest improvement in selected patients.
However, the jawline can become less defined for several reasons:
- Skin laxity
- Descent of facial fat compartments
- Loss of facial volume
- Changes in deeper supporting structures
- Submental fullness
A device that tightens skin may not adequately correct every cause.
For example, a patient with significant facial volume loss may benefit more from a different treatment strategy than a patient whose main concern is mild skin looseness.
Patients with advanced jowls should understand that nonsurgical treatments cannot reliably reproduce the results of a facelift.
Ultraformer vs XERF: Which Is Less Painful?
Comfort is an important factor when choosing an aesthetic procedure.
What Does Ultraformer Feel Like?
Patients may experience:
- Deep aching
- Brief sharp sensations
- Tingling
- Discomfort near bony areas
The sensation depends on the treatment depth, energy level, and individual pain sensitivity.
What Does XERF Feel Like?
Patients commonly describe:
- Warmth
- Heating sensations
- Occasional intense heat
- Temporary tenderness
XERF includes cooling technology intended to improve comfort during treatment.
Which Treatment Is More Comfortable?
XERF is designed to support treatment comfort, but that does not mean it is guaranteed to be painless.
Similarly, not every Ultraformer treatment is highly painful.
Direct comparative pain studies involving these exact devices are limited, so individual experiences should not be presented as proof that one is always more comfortable.
Which Treatment Is Better for Thin Faces?
Patients with naturally slim faces or hollow cheeks should be particularly careful when considering energy-based skin tightening.
Both ultrasound and radiofrequency treatments generate heat within tissue.
Depending on treatment depth, energy settings, and anatomy, unwanted effects on subcutaneous tissue may occur.
Potential concerns include:
- Increased appearance of hollow cheeks
- Unwanted changes in facial contours
- Reduced facial fullness
- Uneven tissue response
These effects are not inevitable, and their frequency with specific devices is not well established.
A dermatologist should assess facial fat distribution and treatment areas before recommending a procedure.
More energy does not necessarily mean better results, particularly in patients with limited facial fat.
Which Treatment Gives Faster Results?
Both treatments may produce some early tissue contraction.
However, collagen remodeling takes time.
Ultraformer Results
Improvement may become more noticeable over several weeks and continue developing over subsequent months.
XERF Results
Some patients may notice an early change in firmness, followed by gradual improvement as collagen remodeling develops.
Neither treatment provides the immediate structural repositioning achieved through surgery.
How Long Do Ultraformer and XERF Results Last?
Results are temporary and vary from patient to patient.
Factors affecting durability include:
- Age
- Degree of skin laxity
- Facial anatomy
- Treatment settings
- Collagen response
- Weight fluctuations
- Continued aging
- Sun exposure and lifestyle
Improvement may persist for many months in some patients, but a fixed duration cannot be guaranteed.
Repeat treatment should be based on reassessment rather than a universal maintenance schedule.
How Many Sessions Do You Need?
Some Ultraformer protocols involve a single treatment followed by evaluation after several months.
XERF protocols may involve one or more sessions depending on the treatment plan.
The number of sessions should be individualized.
Repeated or excessive energy delivery may increase the risk of unwanted tissue effects without necessarily producing better results.
Can Ultraformer or XERF Cause Facial Fat Loss?
Facial fat loss is a concern frequently discussed by patients considering nonsurgical lifting.
Both ultrasound and radiofrequency can generate heat in or near subcutaneous tissues, depending on the treatment parameters.
Unwanted facial contour changes have been reported after some energy-based procedures, although the precise incidence for Ultraformer III and XERF is not well established.
Important safety considerations include:
- Choosing appropriate treatment areas
- Assessing facial fat thickness
- Selecting suitable energy settings
- Avoiding unnecessary repeated treatments
- Reviewing previous aesthetic procedures
Patients with hollow cheeks, naturally thin faces, or previous unwanted fat loss should discuss these concerns before treatment.
What Are the Side Effects and Risks?
Both treatments generally involve minimal downtime, but side effects can occur.
Ultraformer Side Effects
Possible effects include:
- Temporary redness
- Mild swelling
- Tenderness
- Tingling
- Temporary changes in skin sensation
Less common complications may include burns, nerve-related symptoms, or unwanted contour changes.
XERF Side Effects
Possible effects include:
- Temporary redness
- Mild swelling
- Warmth
- Tenderness
Radiofrequency procedures can also cause thermal injury, blistering, pigmentation changes, or unwanted tissue effects if complications occur.
The risk depends on the device, treatment settings, technique, and patient factors.
Patients should receive an explanation of expected benefits and potential risks before treatment.
Is There Any Downtime After Ultraformer or XERF?
Most patients can return to normal daily activities shortly after treatment.
Mild redness, swelling, or tenderness may occur.
Aftercare may include:
- Gentle skincare
- Appropriate sun protection
- Avoiding excessive heat while the skin remains irritated
- Avoiding harsh exfoliation immediately afterward
- Following the treating clinician’s instructions
Persistent severe pain, burns, blisters, or unusual sensory changes require medical assessment.
Can You Combine Ultraformer and XERF?
Some clinicians may consider combining ultrasound and radiofrequency in selected patients.
However, combining two energy-based treatments does not automatically improve results.
The ideal sequence, interval, and cumulative energy exposure for Ultraformer III and XERF have not been firmly established.
An individualized approach is important to avoid unnecessary tissue heating.
Who Should Avoid or Delay Treatment?
Before undergoing Ultraformer or XERF, inform your dermatologist if you have:
- An active skin infection or open wound
- Pregnancy or breastfeeding
- An implanted electronic device, such as a pacemaker
- Metal implants in or near the treatment area
- Recent dermal fillers or other aesthetic procedures
- Previous facial surgery
- Significant facial volume loss
- Medical conditions affecting sensation or healing
The contraindications and precautions differ between devices and must be checked against the manufacturer’s instructions.
How Do Dermatologists Decide Between Ultraformer and XERF?
A dermatologist should assess more than the visible degree of sagging.
Important factors include:
1. Skin Thickness
Skin thickness and tissue characteristics influence which treatment approach may be suitable.
2. Facial Fat Distribution
Patients with limited facial fat may require different treatment settings or an alternative approach.
3. Type of Skin Laxity
Loose skin, facial volume loss, and deeper tissue descent are different problems.
4. Treatment Expectations
Patients should understand the likely degree of improvement and the limitations of nonsurgical procedures.
5. Medical and Aesthetic History
Previous fillers, surgery, energy-based treatments, and medical conditions may influence the treatment plan.
Ultraformer or XERF: Which One Should You Choose?
| Your concern | Recommended discussion |
|---|---|
| Early facial sagging | Whether focused ultrasound or radiofrequency suits your anatomy |
| Mild skin looseness | Expected tightening from either technology |
| Early jowls | Whether the main issue is skin laxity, volume loss, or tissue descent |
| Thin face or hollow cheeks | Risk of unwanted contour changes |
| Fear of pain | Comfort measures and treatment settings |
| Previous fillers | Timing, filler location, and treatment precautions |
| Severe sagging | Whether nonsurgical treatment can meet your expectations |
The best choice is not necessarily the newest or most expensive device.
It is the treatment that offers a reasonable balance of potential benefit, safety, comfort, and realistic results for your individual concerns.
Skin Tightening Consultation at Clear Skin Dermatology, Bangkok
Clear Skin Dermatology is a medical dermatology clinic located in Asoke, Bangkok, Thailand.
Patients interested in nonsurgical facial rejuvenation can consult a dermatologist about concerns such as:
- Mild facial sagging
- Early jowls
- Reduced jawline definition
- Loose skin beneath the chin
- Neck laxity
- Fine lines and age-related skin changes
During a consultation, the dermatologist can assess facial anatomy, skin quality, volume distribution, and treatment goals.
The consultation should include an explanation of the expected benefits, limitations, possible adverse effects, and available treatment options.
The availability of Ultraformer, XERF, or other specific procedures should be confirmed directly with the clinic.
Clear Skin Dermatology
Medical Dermatology & Skin Cancer Clinic
Asoke, Bangkok, Thailand
Frequently Asked Questions
1. What is the main difference between Ultraformer and XERF?
Ultraformer uses focused ultrasound energy to create controlled heating at selected depths. XERF uses monopolar radiofrequency energy to generate heat within tissue. Both aim to stimulate collagen remodeling and improve skin firmness.
2. Is Ultraformer better than XERF?
Not necessarily. Both may help selected patients with mild to moderate skin laxity. There is insufficient direct evidence to establish that either device is universally superior.
3. Which is better for facial lifting?
The choice depends on whether the main concern is skin looseness, deeper tissue descent, or volume loss. Neither treatment can replace surgical lifting in patients with significant sagging.
4. Which is better for the jawline?
Both may improve early jawline laxity. A dermatologist should assess the cause of reduced jawline definition before recommending treatment.
5. Is XERF less painful than Ultraformer?
XERF includes cooling technology designed to improve comfort. However, individual pain experiences vary, and direct comparisons between the exact devices are limited.
6. Can Ultraformer or XERF cause facial fat loss?
Unwanted contour changes are possible with energy-based treatments. Risk depends on anatomy, treatment depth, settings, and technique. Patients with thin faces should discuss this concern.
7. How long does it take to see results?
Some early changes may occur, but collagen remodeling generally develops over several weeks to months.
8. How long do the results last?
Results are not permanent. Their duration varies with individual response, skin condition, treatment parameters, and continued aging.
9. How many sessions are required?
The number of sessions depends on the treatment protocol and individual goals. A clinician should determine the appropriate schedule after assessment.
10. Can I undergo treatment after dermal fillers?
Possibly, but the type, location, and timing of previous fillers must be considered. Inform your dermatologist about all previous injections.
11. Can Ultraformer and XERF be combined?
They may be considered together in selected cases, but the ideal combination protocol is not established for every patient.
12. Which treatment has less downtime?
Both generally have minimal downtime, although temporary redness, swelling, or tenderness may occur.
Final Thoughts: Choosing the Right Skin Tightening Treatment
Ultraformer and XERF are two different approaches to nonsurgical skin tightening.
Ultraformer uses focused ultrasound to deliver energy at selected tissue depths, while XERF uses monopolar radiofrequency to generate controlled tissue heating.
Both may improve mild to moderate skin laxity, but neither is automatically the best option for every face.
A careful assessment of skin thickness, facial fat distribution, degree of sagging, and treatment expectations is essential.
If you are considering facial lifting or skin tightening in Bangkok, Clear Skin Dermatology in Asoke provides dermatology consultations to help you understand your concerns and explore appropriate treatment options.
Medical disclaimer: This article is intended for general educational purposes and does not replace an individual medical consultation. Treatment results and risks vary between patients.
Medical References
Medically reviewed by
Reviewed on

Related articles
-
Aesthetic & Skin Rejuvenation Rejuran vs Plinest vs Vitaran for Acne Scars, Enlarged Pores, and Skin Texture Which is better for acne scars and enlarged pores: Rejuran, Plinest, or Vitaran?

-
Aesthetic & Skin Rejuvenation Rejuran vs Plinest vs Vitaran for Anti-Aging and Skin Rejuvenation: Which Is Better? Rejuran, Plinest, and Vitaran are polynucleotide-based injectable product families increasingly discussed for skin rejuvenation. They are often promoted for improving fine lines, skin texture, and elasticity.

-
Aesthetic & Skin Rejuvenation Rejuran vs Plinest vs Vitaran: Which PN Skin Booster Is Best in Bangkok? Rejuran, Plinest, and Vitaran are injectable skin rejuvenation products associated with polynucleotides (PN), a group of DNA-derived molecules being studied for their potential to improve skin quality.
































